EUCO SELF LEVELING MORTAR
Description
Ready to use cementitious based mortar with special admixtures and sand to product a self leveling mortar with high workability
Uses
For leveling screed ,and smoothing cementitious surfaces where the surface will be ready to apply deferent types of flooring , venyle 1,ceramic tiles...etc.
Also it repairs hair cracks and surface irregularity .
Technical Data
Appearance : powder
Specific gravity : 1,90
pot life : 30 minutes
Mix Ratio : 5:1 powder : water
Shelf life : 1 year
Complies with ASTM C - 109 , C - 1042 , C - 191
Instructions For use
The surface must be sound , clean and free from oil ,dust ... etc. .
The surface should be saturated with water before placing the mortar .
Placing of the self-leveling -mortar with a spatula or a serrated trowel to the required thickness . Then roll with a spiked roller to remove all air and at the same time level off the material .
Remarks
Thickness more than 5 mm to be applied in multi layers
Packing
20kg
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCO SELF LEVELING MORTAR.pdfEUCO ELASTIC-PLASTER
Description
EUCOELASTIC-PLASTER is a ready to use 2-component Plaster based on cement with carefully graded fine aggregates in combination with selected admixtures and synthetic resins .
EUCOELASTIC-PLASTER can be highly recommended to waterproof concrete.
Main Purpose
EUCOELASTIC-PLASTER is particularly suitable for internal and external waterproofing. Due this high quality, EUCOELASTIC-PLASTER offers many application possibilities as for instance for :
- External waterproofing against ground moisture .
- Seeping and subsoil water .
- Swimming - pools
- Containers
- Water reservoirs
- Sewerage plants
- Septic tanks
- Balconies
- Garage and industrial flooring (under a hard surface)
Because of its gray or white Colour, EUCOELASTIC-PLASTER can also be internally used .Paint should not necessary be applied afterwards .
Advantages
EUCOELASTIC-PLASTER can bridge elongation of cracks up to 30% at 23oC . EUCOELASTIC-PLASTER can be used also for internal work .It adheres very good on a proper cleaned concrete surface .
EUCOELASTIC-PLASTER is impermeable under positive and negative loads .Only a thin coat has to be applied .
Application
Cement bound surfaces must be firm , offer good traction ,be free from grout ,dust dirt and additionally free of oil ,grease and other impurities, which can adversely affect uniform adhesion .
Afterwards the concrete surface has to be completely saturated with water .Then apply on the wet concrete surface EUCOELASTIC-PLASTER .
Properties comp.A comp.B
Appearance powder liquid
Colour gray or white white
Bulk weight approx. 1,3 --
Specific weight approx. -- 1,05 g/cm2
Mix ratio by weight 13 8
Pot life at 20oC
Approx. (hours) 3
Re-workable at 20oC
Approx. (hours) 24
Elastic coat mortar for water proofing
Comp-A Comp-B
Re-workable at
Approx.(hours)20oC 24
Thorough hardened at
Approx.(hours) 2
Breaking length at 23oC
Approx. (hours) 30%
Resistivity to water vapour 1/kg =14 m2 . h.pa/mg
Water vapour conductivity 9,9.10-5 mg/m.h.pa
Shelf life (comp . APB) well closed , dry
stored up to 1 year
Minimum hardening temperature + 3oC
Consumption
For waterproofing of the concrete surface 2 coats are required .
Required total thickness is 3 mm .Total required consumption : 1m2 a\ 3 mm = 3 liter = approx. 4,5 kg - 6 kg .
-Mix the two components correctly and thoroughly ! Best results can be achieved with a mechanical stirrer with a max. of 300 r.p.m. (a slowly revolving drilling or boring machine , fitted with a whirl) .
It must be mixed until the two components become homogenous .
-First coat : apply on the wet concrete surface EUCOELASTIC-PLASTER with a toothed trowel (thickness approx. 2 mm )
- Second coat : approx. 1 day later apply with a normal trowel EUCO-ELASTIC-PLASTER (thickness approx. 1 mm ) - Horizontal areas can be applied by brush .-A small amount of water may also be added to the EUCOELASTIC-PLASTER to improve the workability ,if required .
Colour
Light gray and white .
Packing
In bags containing 20 kg
In plastic drums containing 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOELASTIC.pdfNon - shrink grout mix
Description
EUCOGROUT is a ready to use grouting mortar based on cement with carefully graded fine aggregate in combination with selected admixtures
Main Purpose
For free flow grouting to provide heavy duty support beneath load bearing units . For machine base plates , crane and transport rails. Anchors and dowels for bridges etc. .
Advantages
Eliminate shrinkage problems associated with conventional cement grouts and ensures effective contact and support .
Facilitates rapid installation and early operation of plants because of high early strengths. Factory controlled prepackaged components eliminate material selection , control and operator problems on site .
Properties
Appearance powder
Bulk weight 1,53
Specific gravity 2,75
Chloride content nil
Shelf life well closed , dry storage up to 1 year .
Complies with ASTM C -109 ,
C -1090 , 939 , 191 , 78 &
CRD-C-621 , C230 - 86 &
CRD - C - 611 , C 82778 C-1107.
Consumption
Approx. . 2 kg EUCOGROUT for 1 liter grout T
he rate of mixing water is approx. . 0,15 liter per kg
Remarks
EUCOGROUT 110 : max. . size of aggregates 1 mm
EUCOGROUT 130 : max. . size of aggregates 3 mm
Instruction for use
EUCOGROUT should be mixed with water to thedesired consistency .
Thorough mixing is essential .Add dry mix to water not vice versa .EUCOGROUT should be placed immediately after preparation .The top of concrete base which is to receive the EUCOGROUT must be cleaned of all defective concrete , laitance , oil or grease. All loose or friable material must be removed Compressed air is ideal for this purpose.
Any parts of the equipment to be installed which may come in contact with the grout must be carefully and completely cleaned of oil , grease or rust .
(EUCOFLOW – MORTAR)
Non – shrink grout mix.
The surface of the foundations should be saturated with water before the grout is placed. Mix the grout as close as possible to the equipment and have on hand asufficient quantity to ensure that pouring will be continuous once it has started. Whether mixed by hand or by concrete mixer ,add recommended amount of water to produce desired strength and flowability .
Any machinery adjacent to the grouting operation ,which might cause vibration of the foundation whilst grouting is in progress and before the mortar has set ,must be shut down .
Packing
In drums containing 20 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOGROUT.pdf
Description
EUCOGUNIT is a quick setting and waterproofing compound for sprayed concrete and Gunit , which allows spraying concrete and mortar even on a wet surface or one subject to slight infiltration .
EUCOGUNIT speeds the work and contributes to good water tightness of the sprayed concrete linings if the aggregate materials are chosen carefully .The admixture facilitates overhead spaying and reduces rebound .
Application
EUCOGUNIT is used with sprayed concrete and mortar in galleries And tunnels, for retaining walls and embankment linings , sheds , tanks etc. .
Instruction for use
EUCOGUNIT is supplied in powder form ready for use . Dosage is between 3% and 7% by weight of cement .The normal effect is fully achieved with 3% - 4% .Dosages of 5% - 7% result in much quicker setting or hardening .
The required amount of EUCOGUNIT is mixed with the dry sand- cement or gravel -sand -cement mixture. Large quantities of dry mix can be prepared if protected against moisture .
When guniting is interrupted , care must be taken that the water dose not flow back in the supply hose causing the mix to set .Larger infiltration of water must be sealed off with EUCORAPID or drained off .
Concrete or mortar sprayed with EUCUGUNIT requires a covering layer without accelerator .
storage
Shelf life in undamaged bags is unlimited when stored in a dry place .
EUCOGUNIT is insensitive to frost .
Important indication
Setting is slowed down due to different circumstances
1- Using cold cement, cold sand or, cold water .
2- Having very cold ambient weather which results in a very cold surface .
3- Old cement .
Packing
EUCOGUNIT, white powder , in bags of 25 kg or drums of 170 kg .
. .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOGUNIT.pdfEUCOPLASTER
Thin coat mortar for waterproofing
Description
EUCOPLASTER is a ready to use mortar for waterproofing of concrete surfaces and joints.
EUCOPLASTER is based on cement with carefully graded fine aggregates in combination with selected admixtures
Main Purpose
As thin coat mortar for rigid surface waterproofing .It is particularly suitable for external waterproofing due to its high quality, EUCOPLASTER offers many application possibilities as for instance for :
external waterproofing against ground moisture , seeping and subsoil water , swimming pools, containers ,water reservoirs ,sewerage plants ,septic tanks ,garage and industrial flooring (under a hard surface) .
Advantages
-EUCOPLASTER is ready to use product in powder form .
-It consists of cement ,special granulated quartz sand and high grade inorganic sealing ingredients.
-Only a fixed amount of water is added for working .
-EUCOPLASTER is impermeable under positive and negative loads .
-Extremely good adhesion to sound concrete
-Extremely high workability .
-Easy repair is possible .
Properties
Appearance powder
Bulk weight 1,35
Specific gravity 2,88
Chloride content nil
Colour gray or white
Shelf life well closed ,
dry stored up to 1 year
Consumption
Earth moisture mortar thickness approx. .1-2 mm 2-3 kg/m2
Water pressure mortar thickness approx. . 3-4 mm 6-8 kg/m2
Packing
Bags containing 25 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOPLASTER.pdfEUCOPUTTY
Ready to use putty
Description
Ready to use putty , based on cement and carefully graded aggregates , with selected admixtures .
Main Purpose
EUCOPUTTY is used for filling up cracks , cavities ,to repair damaged edges of stairs and concrete elements For leveling uneven concrete ,could be used as well ,as textured finished coat for for interior and exterior surfaces.
Advantages
EUCOPUTTY is ready to use , only water has to be added .
EUCOPUTTY has an excellent adhesion on cement bounded surfaces
Properties
Appearance powder
Bulk weight 1,4
Specific gravity 2,8
Chloride content nil
Colour gray
Shelf life well closed ,
dry store up to 1 year .
Complies with ASTM C - 1107 - 89 , BS 5075
BS 4550 / 4551 / , BS 881 / ISAT
Consumption
Approx. 2 kg for 1 liter of putty
Instructions for use
EUCOPUTTY should be mixed with water to a stiff consistency .
The substrate must be clean , sound and matt-moist . For filling deep cavities we recommend to work in different layers .
Remarks
Protect the fresh concrete mortar against drying out during the hardening period .
Packing
Bags containing 25 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOPUTTY.pdfEUCOQUICK MORTAR
Quick setting ready to use mortar
Description
Quick setting ready to use mortar ,based on cement and carefully graded aggregates, with selected admixtures
Main Purpose
EUCOQUICK MORTAR is used for sealing severe local water leakage and for plugging infiltration in concrete
masonry and rocks .
Advantages
EUCOQUICK MORTAR is ready to use , only water has to be added . Setting time approx. 20 seconds
Properties
Appearance powder
Bulk weight 1,1
Specific gravity 2,9
Chloride content nil
Colour gray
Shelf life well closed ,
dry stored up to 1 year
Complies with ASTM C 387 78 types III BS 1881 / 4550 / 4551 BS 5075 and ASTM C 67
Consumption
Approx. 1,5 kg for 1 liter of mortar
Instructions for use
EUCOQUICK MORTAR should be mixed with water to a stiff consistency.The substrate must be clean and sound . Do not over mix the material !
Remarks
Protect the fresh concrete mortar against drying out during the hardening period .
For thick layers , you should work in different layers .
Packing
Containers containing 5 kg and 20 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOQUICK MORTAR.pdfEUCORAPID - MORTAR
Short setting mortar
Description
Ready to use mortar with short setting time on cement base with carefully graded aggregates and selected admixtures .
Main Purpose
In all cases where a short setting time is desired as for instance for the fixing of anchor bolts , dowels and repair work etc. .
Advantages
EUCORAPID - MORTAR is ready to use , only water has to be added .
Setting time in 10 - 20 minutes .
Properties
Appearance powder
Bulk weight 1,23
Specific gravity 2,78
Chloride content nil
Colour gray
Shelf life well closed ,
dry stored up
to 1 year
Consumption
Depending on the use Approx. 2 kg per 1 liter of mortar
Instructions for use
EUCOQUICK - MORTAR should be mixed with water to a stiff consistency . The substrate must be clean and sound and wetted beforehand until complete saturation.
Mix only the quantity you can use within 10 - 15 minutes .
Remarks
Protect the fresh concrete mortar against drying out during the hardening period .
Clean , washed sand can be added to EUCORAPID-MORTAR up to 1 : 1 .
Packing
Bags containing 25 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCORAPID.pdfEUCOQUICK MORTAR
Quick setting ready to use mortar
Description
Quick setting ready to use mortar ,based on cement and carefully graded aggregates, with selected admixtures
Main Purpose
EUCOQUICK MORTAR is used for sealing severe local water leakage and for plugging infiltration in concrete
masonry and rocks .
Advantages
EUCOQUICK MORTAR is ready to use , only water has to be added . Setting time approx. 20 seconds
Properties
Appearance powder
Bulk weight 1,1
Specific gravity 2,9
Chloride content nil
Colour gray
Shelf life well closed ,
dry stored up to 1 year
Complies with ASTM C 387 78 types III BS 1881 / 4550 / 4551 BS 5075 and ASTM C 67
Consumption
Approx. 1,5 kg for 1 liter of mortar
Instructions for use
EUCOQUICK MORTAR should be mixed with water to a stiff consistency.The substrate must be clean and sound . Do not over mix the material !
Remarks
Protect the fresh concrete mortar against drying out during the hardening period .
For thick layers , you should work in different layers .
Packing
Containers containing 5 kg and 20 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOREPAIR.pdf